I have that set to 0 already. Any other thoughts? Thanks for the response.
When you're sending the 2% to WU and CWOP, what's being sent to MBW and your console?
What we need to figure out is if the 2% is coming from some issue in the software, or if it coming directly from the sensor.
Sensirion sensors have a lot of error at the far ends of the RH scale. I've seen them top out as low as 97% and as high as 102%. It's possible the sensor is "flipping" the 102% to 2%, but you'd think you'd see that on your console and MBW, too.
Or it might be that Acurite's and Kevin's software aren't handling the "overshoot" the same way.