I just put my new 1035 into service to replace my old La Crosse 2300.
First issue is that when I pulled the protective tape off of the weather ticker area it left behind quite a bit of glue. I cleaned it as best as I could but some remained. The weather ticker is next to impossible to read unless you hold your tongue just right and look sideways. I this a normal issue?
The wind vane seems to be very stiff. I watched a Acurite video where they were spinning the vane and there appeared to be little is any resistance. It will take a stiff breeze to move my wind vane.
Dennis - KK7X
http://rathdrumweather.us and http://rathdrumweather.us/weather2
First issue is that when I pulled the protective tape off of the weather ticker area it left behind quite a bit of glue. I cleaned it as best as I could but some remained. The weather ticker is next to impossible to read unless you hold your tongue just right and look sideways. I this a normal issue?
The wind vane seems to be very stiff. I watched a Acurite video where they were spinning the vane and there appeared to be little is any resistance. It will take a stiff breeze to move my wind vane.
Dennis - KK7X
http://rathdrumweather.us and http://rathdrumweather.us/weather2