Re: Stiff wind vane and console issue
The wind vanes should spin with no resistance, and I believe that I saw a posting here at one point saying that they were among the best at measuring low speeds among the different manufacturers.There...
View ArticleRe: 9150TRX Acu-Link Bridge No Blinking Status Lights - Can't connect..
You'll probably have better luck on support.acurite.com or calling their support line.The app and boot firmware sounds terribly ancient. I'm on App version 127 and Boot version 104.
View ArticleRe: Mounting on pole.
I believe that it is sized for 3/4" electrical conduit, but don't quote me on that.When you get to Home Depot and start shaking the various 10' conduit offerings, you will probably come to the same...
View ArticleRe: Stiff wind vane and console issue
Thanks - that is what I figured about the wind vane. My old La Crosse 2300 is showing the correct direction. As for the ticker it is not a big deal. Overall the contrast of the unit is poor. But I...
View ArticleRe: Mounting on pole.
I believe I used 3/4" threaded galvanized pipe from Home Depot as well. I bought two 4' lengths and used a coupler. I stuck those in an umbrella stand for the winter; I'll do something more permanent...
View ArticleRe: Mounting on pole.
Thanks for the feedback. I think I will go with 1" galvanized for the mast and then reduce down with coupler and 3/4" nipple right at the 5 in 1.Have not decided how high I want to go. Looked over...
View ArticleClik here to view.
Re: New Software For The 5-in-1 Sensor, And Acu-Link Bridge
Quote from: SamH on January 26, 2014, 07:11:12 PMKevin, I have multiple sensors, Tower, 3-in-1, 5-in-1, can you pick and choose which data to upload? I currently am working on siting the sensors. I...
View ArticleClik here to view.
Re: Mounting on pole.
The instructions state to mount on a 3/4" pole. You could install a 4x4 post and attach a piece of 3/4" conduit to the side of it with a couple of brackets. This way you can simply let the metal pole...
View ArticleRe: Mounting on pole.
You might want to check this out. It is from NOAA and was provided by Nincehelser on the AcuRite forum.http://www.srh.noaa.gov/images/epz/mesonet/CWOP-Siting.pdf
View ArticleRe: Mounting on pole.
Official CWOP document, has siting information.http://www.srh.noaa.gov/images/epz/mesonet/CWOP-OfficialGuide.pdf
View ArticleClik here to view.
Re: Tower sensor addresses, Aculink bridge max sensors?
Well I can confirm I'm receiving data from a 3N1, a 5N1, and five Tower sensors. So far they have unique addresses. I labeled each one on the outside with its sensor address, and in my monitoring...
View ArticleAculink Bridge reception problems
I recently purchased an aculink internet bridge, a color weather station and an additional tower sensor. My plans for this are to remotely monitor indoor and outdoor temps at a second home. I'm...
View ArticleRe: Aculink Bridge reception problems
You might have a better response from Acurite if you post to their community at support.acurite.com. If you know your bridge's IP address, you can check signal strengths and firmware versions. For...
View ArticleRe: Aculink Bridge reception problems
thanks for the reply. I also have an Application Version of 126, and a boot firmware of 104.I tried to post to the acurite support site. Whenever I click the Login or Sign up options in the upper...
View ArticleRe: Aculink Bridge reception problems
Hmm that is unfortunate. And the verification didn't get into your spam folder? I know they are a bit slow to respond to email; I suppose you could try calling them. The distance you're getting is...
View ArticleClik here to view.
Re: My Acurite pro with bridge experience
nincehelser: The clocks were almost 1 hour apart, which is why I thought maybe someone forgot to adjust for daylight savings, or something. I'm in AZ, and we don't play that daylight savings mind...
View ArticleRe: My Acurite pro with bridge experience
That would mean your bridge currently can't hear the tower.If you go to MBW, it should show that tower with no signal but will still give you a reading and timestamp of the last recorded signal.
View ArticleRe: My Acurite pro with bridge experience
Quote from: jems on Today at 01:33:59 PMEverything is looking pretty good today.Something still baffles me though. I don't understand how that "Tower" was showing up on my AcuRite / Acu-Link page....
View ArticleRe: My Acurite pro with bridge experience
Oh sorry. I meant my own "5 in 1" is 30' away. I only have the one outdoor unit: a "5 in 1".I thought the bridge would hear the sensor no matter what frequency I used-- since the bridge has no way...
View ArticleRe: My Acurite pro with bridge experience
Quote from: jems on Today at 04:18:43 PMOh sorry. I meant my own "5 in 1" is 30' away. I only have the one outdoor unit: a "5 in 1".I thought the bridge would hear the sensor no matter what...
View Article