I have the 5-in-1 weather station. Do they have a display that is strictly battery operated?Where I want to but the new display there is no outlet to plug in.
Since I have had my Atlas and it's new touch screen display it shows " rain " in the future forecast ? Is there a setting I'm missing that needs to be twerked ? Here's today screen shot and it looks like this everyday . Any help would be appreciate !!
I can completely agree with this, however, the 0.3" diurnal spread is a little extreme in my experience. Regardless, all this is thanks to the thermal low that develops over the Yuma region in the summer and drops the daily pressure simply from heat causing bone dry air to rise.Since I have had my Atlas and it's new touch screen display it shows " rain " in the future forecast ? Is there a setting I'm missing that needs to be twerked ? Here's today screen shot and it looks like this everyday . Any help would be appreciate !!
The forecast algorithm this display uses is useless in regions where daily pressure changes are significant ie arid areas of south-west. Here we have daily changes as much as 0.3 inches, all without significant weather change, for months at the time.
So, just ignore the weather forecast on your display.
the 0.3" diurnal spread is a little extreme in my experience.
Thank you for your inquiry, I am happy to assist.
At this time, we have had a handful of users experiencing this same issue with the UV readings. We are currently investigating this. As soon as we come to a resolution we will be in contact with you as far as the next step. I do have all of the information about your sensor that we need to investigate.
I apologize for the issues you have experienced and we do appreciate your patience in the above matter.
Thank you,
Where I want to but the new display there is no outlet to plug in. 
pi@raspberrypi:~ $ sudo rtl_433 -G
rtl_433 version 19.08-36-g694ea62 branch master at 201910172222 inputs file rtl_tcp RTL-SDR
Use -h for usage help and see https://triq.org/ for documentation.
Trying conf file at "rtl_433.conf"...
Trying conf file at "/root/.config/rtl_433/rtl_433.conf"...
Trying conf file at "/usr/local/etc/rtl_433/rtl_433.conf"...
Trying conf file at "/etc/rtl_433/rtl_433.conf"...
Use -G for testing only. Enable protocols with -R if you really need them.
Consider using "-M newmodel" to transition to new model keys. This will become the default someday.
A table of changes and discussion is at https://github.com/merbanan/rtl_433/pull/986.
Registered 135 out of 141 device decoding protocols [ 1-4 6-8 10-17 19-26 29-64 67-141 ]
Found Rafael Micro R820T tuner
Exact sample rate is: 250000.000414 Hz
[R82XX] PLL not locked!
Sample rate set to 250000 S/s.
Tuner gain set to Auto.
Tuned to 433.920MHz.
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
time : 2019-10-19 12:56:21
model : Acurite tower sensor id : 2265
channel : B battery_low: 0 Temperature: 2.5 C
Humidity : 12
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
time : 2019-10-19 12:56:21
model : Acurite tower sensor id : 2265
channel : B battery_low: 0 Temperature: 2.5 C
Humidity : 12
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
time : 2019-10-19 12:56:21
model : Acurite tower sensor id : 2265
channel : B battery_low: 0 Temperature: 2.5 C
Humidity : 12
acurite_txr_decode: Acurite 5n1 sensor 0x0075 Ch B, Status 03, Unknown message type 0x07
acurite_txr_decode: Acurite 5n1 sensor 0x0475 Ch B, Status 03, Unknown message type 0x07
acurite_txr_decode: Acurite 5n1 sensor 0x0875 Ch B, Status 03, Unknown message type 0x07
It works but seems to report lower than others around in my area, ie, especially compared to Ambient Wx stations.